The Auto Provision Screen - ZyXEL Communications X6004 User Manual

Table 61 SIP Extension: Advanced (continued)
LABEL
MWI Enable
Group Pickup
Apply
Back to Peer
List

13.3.10 The Auto Provision Screen

Use this screen to generate the auto provision file for the SIP extension on the
X6004. To access this screen, click the Auto Provision tab in any of the SIP
extension configuration screen to view the screen as shown.
Figure 107 SIP Extension: Auto Provision
Each field is described in the following table.
Table 62 SIP Extension: Auto Provision
LABEL
MAC Address
Serial No.
Auto Provision
Active
X6004 User's Guide
DESCRIPTION
Check this box to enable Message Waiting Indicator (MWI) mode for
this extension. The X6004 sends a beeping tone to the IP phone when
there is at least one voicemail for this extension.
Check this box if you want to enable the group pickup feature for this
extension. If this extension is added to a pickup group, then the phone
at this extension rings when any extension that is part of this pickup
group is called. See Chapter 15 on page 239
group pickup.
Click this to save your changes.
Click this to go back to the Authority Group configuration screen
without saving your changes.
DESCRIPTION
Type the MAC address of your SIP phone in this field. You can leave this
field empty when your use a SIP softphone.
Type the serial number of your SIP phone in this field. You can leave
this field empty when you use a SIP hand phone.
Select On to activate auto provision or Off to deactivate it.
Chapter 13 Authority Group
for more information on
219