Configuring The Call Waiting Screen - ZyXEL Communications X6004 User Manual

Hide thumbs Also See for X6004:

Table of Contents

22.8.1 Configuring the Call Waiting Screen

Use this screen to configure call waiting on the X6004. Click Configuration >

PBX > Call Services > Call Waiting to open the screen as following.

Figure 206 Call Waiting Setting

The following table describes the labels in this screen.

Table 128 Call Waiting Setting

Call Waiting

X6004 User's Guide

Select Enable or Disable to turn this feature on or off.

If you enable this feature, then call waiting will apply to all extensions

except the disable list below and ISDN extesions.

If you disable this feature, then call waiting will only apply to the

extensions in the enable list below.

To add one extension, select an available one in the Extension List field,

click the Right button (to add it into the Setting List field). You can

remove extensions from the list by selecting one extension in the Setting

List field and click the Left button.

Click this to save your changes and to apply them to the X6004.

Click this to set every field in this screen to its last-saved value.

Chapter 22 Call Services