ZyXEL Communications X6004 User Manual page 395

Each field is described in the following table.
Table 156 Status Observation > PRI Trunk
LABEL
Query
Refresh interval
PRI Trunk
Machine ID
Slot
Port
Group Name
Caller ID
Called Num.
Direction
X6004 User's Guide
DESCRIPTION
Use this section to specify your query criteria. You can select an
attribute, value pair for your search. You can choose to query by:
• Machine ID - choose the X6004 (if you have a ZyStack configured)
for which you want to view status details of ISDN PRI connections.
• Direction - select which direction of calls you want to view status
details about ISDN PRI lines. Select In for incoming calls, Out for
outgoing calls or all for both. Alternatively, select N/A to display
configured PRI trunk(s) without any calls over it.
Click Query to update the status detail table in the PRI Trunk section
of the screen.
Enter how often (seconds) you want the X6004 to update this screen.
Click Apply to update the screen immediately.
If you do not want this screen to update periodically, enter 0.
This section displays the status detail table.
This field displays the auto-configured name of the X6004.
This field displays the slot (A - D) where the ISDN PRI interface card is
installed.
This field displays the port number on the ISDN PRI interface card.
This field displays the outbound line group name to which an ISDN PRI
line is assigned.
This field displays the caller identifier of a call or N/A for configured PRI
trunk(s) without any calls over it.
This field displays the dialed number of a call or N/A for configured PRI
trunk(s) without any calls over it..
This field displays In for an incoming call, Out for an outgoing call or
N/A for configured PRI trunk(s) without any calls over it.
Chapter 26 Status Observation
395