Auto Provisioning - ZyXEL Communications X6004 User Manual

Chapter 3 Tutorials

3.1.4 Auto Provisioning

A ZyXEL IP phone that supports auto provisioning can get a configuration text file
from the X6004 (see
configuration file contains the SIP settings that the SIP device uses to register
with the X6004. The following graphic shows an IP phone (A), softphone (B), VoIP
gateway (C), and ATA (D) downloading configuration text files from the X6004.
Figure 13 Auto Provisioning
After you configure the SIP extensions (see
your network connections (see
to map each SIP extension to the appropriate SIP device. You need the MAC
address of each SIP device (or the serial number if it is a softphone).
Click Configuration > PBX > Server Configuration > Auto Provision. Then
1
click a SIP extension's Edit icon.
48
Appendix on page 521
Figure 11 on page
for supported IP phones). The
Section 3.1.1 on page
46), use the following directions
X6004 User's Guide
43) and make