If this does not work, you have to reset the X6004 to its factory defaults. See
5
Section 35.2 on page
I forgot the password
The default password is 1234.
1
Enter the initrd screens and reset the admin password to its default (see
2
39.6.3 on page
If this does not work, you have to reset the X6004 to its factory defaults. See
3
Section 35.2 on page
I cannot see or access the Login screen in the web configurator
Make sure you are using the correct IP address.
1
• The default LAN IP address is 192.168.1.12 and WAN IP address is
172.16.1.1.
• If you changed the IP address
address.
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
Check the hardware connections, and make sure the LEDs are behaving as
2
expected. See the Quick Start Guide and
Make sure your computer is in the same subnet as the X6004's LAN or WAN. (If
3
you know that there are routers between your computer and the X6004, skip this
step.)
Make sure you access the X6004 web configurator via HTTPS (https://the X6004's
4
IP address), not HTTP.
Make sure your computer is with an IP address which is in the white list of the
5
X6004's WWW access.
Make sure your Internet browser does not block pop-up windows and has
6
JavaScripts and Java enabled. See
X6004 User's Guide
471.
517).
471.
(Section 5.2 on page
I forgot the IP address for the X6004
Section 4.1 on page
Chapter 39 Troubleshooting
114), use the new IP
Section 1.4 on page
32.
101.
Section
511