ZyXEL Communications X6004 User Manual page 490

Chapter 37 Web Portal
Table 200 Office Hour Setting (continued)
LABEL
Time
Holiday
Date
Description
Add
Delete
Apply
Default
490
DESCRIPTION
Specify the time range during the working days that you want the
X6004 to treat as working hours.
When entering a time range, the following conditions apply:
• You can enter up to six time ranges, with each range consisting of a
start time and an end time.
• The time entered in each field must be in 24 hr format (such as
"08:00" for 8 AM or "24:00" for midnight).
• The start and end times must be separated by a hyphen.
For example, a standard work day may look like this:
In this example, the first time block is from 8 AM until 12 noon. The
second time block is from 1 PM until 5:30 PM.
This section allows you to set a specific day of the year as a holiday,
which the X6004 will then treat as "after office hours".
Enter a date in mm/yy format (double digit month / year; for example,
02/09 for February, 2009.)
You can also click the "..." icon to open the interactive calendar:
Click a day to select it.
Use the < and > buttons to cycle through the year and months.
Click the X button to close the calendar.
Enter a description of the holiday using up to 63 alphanumeric
characters (a-z, A-Z, 0-9, spaces, underscores and hyphens allowed).
Click this to add the newly configured holiday to the list.
You must fill out the Date and Description fields first.
Click this to remove a holiday from the list.
Click Apply to save your changes.
Click this button to set every field in this screen to factory default
configuration.
X6004 User's Guide