Snom Profile Setup: View Sptgen - ZyXEL Communications X6004 User Manual

Chapter 7 Auto Provision
Each field is described in the following table.
Table 36 snom Profile Setup > Edit
LABEL
Auto Provision
Profile Setting
MAC Address
Auto Provision
Active
Product
Set Profile
Cancel

7.3.4 snom Profile Setup: View SPTGEN

Use this screen to view the configuration file (SPTGEN) file for a specific extension.
To access this screen, click Configuration > PBX > Server Configuration >
Auto Provision > snom Profile Setup and click the Advanced icon next to the
extension for which you want to view the SPTGEN file.
The SPTGEN file displays the configuration settings sent from the X6004 to a snom
device configured for auto provisioning. Click Cancel to go back to the snom
Profile Setup screen.
162
DESCRIPTION
Specify the MAC address of the ZyXEL device that receives
configuration settings from the X6004 for this extension.
This field is left blank for extensions assigned to software based IP
phones.
Choose On, if you want to activate auto provisioning for this extension
or choose Off if you want to deactivate auto provisioning for this
extension.
Select the snom VOIP product to be targeted by this auto provision
profile. This ensures greater compatibilty between it and the X6004.
Click Set Profile to create the configuration file and return to the snom
Profile Setup screen.
Click Cancel to go back to the snom Profile Setup screen without
saving any changes.
X6004 User's Guide