The Ntp (Network Time Protocol) Screen - ZyXEL Communications X6004 User Manual

5.5 The NTP (Network Time Protocol) Screen

Use this screen to configure time settings on the X6004. To access this screen,
click Configuration > Network > NTP.
Figure 46 Network > NTP
Each field is described in the following table.
Table 16 Network > NTP
LABEL
Current Time
and Date
Time and Date
Setup
Manual
New Time
New Date
Get from Time
Server
Time Server
Address 1/2
X6004 User's Guide
DESCRIPTION
This section displays the current date and time.
Select this if you want to specify the current date and time in the fields
below.
Enter the new time in this field, and click Apply.
Enter the new date in this field, and click Apply.
Select this if you want to use a time server to update the current date
and time in the X6004.
Enter the IP address or URL of your time server. Check with your ISP or
network administrator if you are unsure of this information.
Chapter 5 Network Deployment
119