The Voice Mail Screen - ZyXEL Communications X6004 User Manual

Hide thumbs Also See for X6004:
Table of Contents

Advertisement

Chapter 9 Voice Mail

9.2 The Voice Mail Screen

Use this screen to set up the voice mail settings on the X6004. To access this
screen, click Configuration > PBX > Server Configuration > Voice Mail.
Figure 77 Server Configuration > Voice Mail
Each field is described in the following table.
Table 42 Server Configuration > Voice Mail
LABEL
Voice Mail Management
Max Length per
Call
Max Usage per
User
E-mail Content
E-mail Subject
174
DESCRIPTION
Specify the maximum number of seconds for each voice mail message.
This value can be from 1 to 90 seconds.
Specify the maximum number of seconds for all voice mail messages
for each extension. When a user hits this limit then the X6004 will no
longer save voice mail messages. This value can be from 1 to 300
seconds. A hard disk installed can increase this value to up to 5000
seconds.
Enter up to 150 alphanumeric characters (a-z, A-Z, 1-0, all punctuation
included) as the subject line for e-mails sent out by the X6004 to notify
users of pending voice mails.
X6004 User's Guide

Advertisement

Table of Contents
loading

Table of Contents