The Wan Screen - ZyXEL Communications X6004 User Manual

Chapter 5 Network Deployment

5.3 The WAN Screen

You can configure your connection to the ISP or the default gateway router as well
as DNS server information. This allows the X6004 to communicate with IP devices
on the WAN.
Use this screen to set up a connection with the ISP or the default gateway router.
To access this screen, click Configuration > Network > WAN.
Figure 44 Network > WAN
Each field is described in the following table.
Table 14 Network > WAN
LABEL
WAN Ethernet
TCP/IP Settings
Get
automatically
from ISP
Static IP
(Default)
IP Address
Subnet Mask
Default
Gateway
Primary DNS
Secondary DNS
116
DESCRIPTION
Select this if your ISP did not assign you a static IP address. Click
Renew to send a request to the DHCP server for a new IP address.
Select this if your ISP or network administrator assigned you a static IP
address.
Enter the IP address provided by your ISP or network administrator.
Enter the subnet mask your ISP or network administrator provided for
the remote node.
Enter the IP address your ISP or network administrator provided for the
default gateway to the Internet.
Enter the IP address of the DNS server your ISP or network
administrator provided to you.
Enter the IP address of the second DNS server your ISP or network
administrator provided to you. If you were not provided one, leave this
field blank.
X6004 User's Guide