ZyXEL Communications X6004 User Manual page 283

Table 96 AA for SIP Trunks (continued)
LABEL
Representative
Number
Routing by SIP
"To" Header
DDI/DID Mask
DDI/DID
Number
Extension
Number
Add
Apply
Cancel
X6004 User's Guide
DESCRIPTION
This field displays the representative number of the SIP trunk if you
have configured one in the SIP trunk setting (see
page 277).
Select Enable if this auto-attendant interacts with a SIP server that
uses the SIP To header to do the DDI/DID mapping. If this SIP trunk
outbound line group has DDI/DID mode enabled, using this deletes all
of the this SIP trunk outbound line group's DDI/DID mapping settings
and sets the DDI/DID Mask to 0.
Select Disable to use the SIP request URI to do the DDI/DID mapping.
Enter a number (0~10) to decide the number of digits you want to
enter for the next DDI/DID number(s). 0 means you can enter any
number of digits for the next DDI/DID number(s).
Enter a DDI/DID number which allows outsiders to call and reach an
extension directly. The number of digits you can enter in this field
depends on what you set in the Representative Number DDI/DID
Mask field.
This field can be 1-10 digits or 1-10 digits - 1-10 digits (two sets of up
to ten digits separated by a hyphen). For example, 5783900 or
5783900-5783999.
Select the first radio box and enter the extension number to which the
DDI/DID number maps. Alternatively, select Auto-Attendant to
forward the matched DDI calls to auto-attendant.
This field can be 1-10 digits or 1-10 digits - 1-10 digits (two sets of up
to ten digits separated by a hyphen). For example, 5783900 or
5783900-5783999.
Click this to add a new DDI/DID-to-extension mapping rule.
Click this to save your changes and to apply them to the X6004.
Click this to go to the Outbound Group screen without saving your
changes.
Chapter 18 Outbound Line Group
Section 18.5.1 on
283