ZyXEL Communications X6004 User Manual page 51

In the web configurator, click Configuration > PBX > Outbound Line
1
Management > Outbound Line Group to open the following screen.
Click the Add icon in the FXO Trunk section to open the following screen. Enter
2
the name of the group (PSTN1 in this example) and click Apply. Note the
Machine ID field (this is a name automatically assigned to the X6004). In some
web configurator screens, the outbound line group is identified in the following
format Machine ID:Group Name, so in our example it is IPPBX_001:PSTN1.
The new outbound line group displays in the following screen. Now you will add
3
the FXO connections to the outbound line group. Click the outbound line group's
Advanced icon.
X6004 User's Guide
Chapter 3 Tutorials
51