Supported Mibs; Snmp Traps - ZyXEL Communications X6004 User Manual

SNMP itself is a simple request/response protocol based on the manager/agent
model. The manager issues a request and the agent returns responses using the
following protocol operations:
• Get - Allows the manager to retrieve an object variable from the agent.
• GetNext - Allows the manager to retrieve the next object variable from a table
or list within an agent. In SNMPv1, when a manager wants to retrieve all
elements of a table from an agent, it initiates a Get operation, followed by a
series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.

25.3.1 Supported MIBs

The X6004 supports MIB II that is defined in RFC-1213 and RFC-1215. The X6004
also supports private MIBs (pbx.mib and zyxel-pbx-Common.mib) to collect
current call count, SIP peer and SIP trunk information. The focus of the MIBs is to
let administrators collect statistical data and monitor status and performance. You
can download the X6004's MIBs from www.zyxel.com.

25.3.2 SNMP Traps

The X6004 will send traps to the SNMP manager when any one of the following
events occurs.
Table 147 SNMP Traps
OBJECT LABEL
Cold Start
authenticationFailure 1.3.6.1.6.3.1.1.5.5
X6004 User's Guide
OBJECT ID DESCRIPTION
1.3.6.1.6.3.1.1.5.1 This trap is sent when the X6004 is turned
on or an agent restarts.
This trap is sent when an SNMP request
comes from non-authenticated hosts.
Chapter 25 Monitor
383