ZyXEL Communications X6004 User Manual page 238

Chapter 14 Ring Group
Each field is described in the following table.
Table 75 Add/Edit Hunt Group
LABEL
Entry Number
Description
Ring Algorithm
Music On Hold
Time Out
Office Hours
Night Service
Apply
Cancel
238
DESCRIPTION
Type the number you have to dial to call the extensions in this hunt
group. This number can be from 3-10 digits long.
Type a description for this hunt group.
Select the method for the X6004 to decide the ring order of extensions
in this hunt group.
• Ring All - ring all extensions at the same time until one answers.
• Round Robin - take turns ringing each available (not engaged)
extension in the hunt group. Start with the first extension (top in the
Selected Member column) in this group.
• Least Recent - ring the extension which was least recently called in
this group.
• Fewest Calls - ring the extension with fewest completed calls in this
group.
• Random - ring a random extension.
Select the Music on Hold a caller hears when being placed on hold with
an extension from this hunt group.
• Ring Tone - The caller hears the system ring tone.
• System MOH - The caller hears the music file selected from the
associated menu.
Set the duration in seconds for the call to be sent around the hunt
group before the X6004 hangs up.
Select the extensions that you want to be in this hunt group during the
office hours period you configured for the X6004. (See
page 193.)
Move the extensions you want to be in this hunt group to the Selected
Member column by highlighting them in the Peer Pool column and
clicking the Right icon.
Remove the extensions you don't want to be in this hunt group from the
Selected Member column by highlighting them and clicking the Left
icon.
Select the extensions that you want to be in this hunt group in the off
hours period (not during office hours) you configured for the X6004.
(See Chapter 12 on page
Move the extensions you want to be in this hunt group to the Selected
Member column by highlighting them in the Peer Pool column and
clicking the Right icon.
Remove the extensions you don't want to be in this hunt group from the
Selected Member column by highlighting them and clicking the Left
icon.
Click Apply to save your changes and to apply them to the X6004.
Click Cancel to go back to the Ring Group configuration page without
saving your changes.
193.)
Chapter 12 on
X6004 User's Guide