The Registration Screen - ZyXEL Communications X6004 User Manual

36.2 The Registration Screen

Use this screen to register your X6004 with myZyXEL.com and activate a service,
such as a softphone extension license. Click Maintenance > License Control >
Registration in the navigation panel to open the screen shown next.
Figure 287 License Control > Registration
Each field is described in the following table.
Table 195 License Control > Registration
LABEL
Device
Registration
New
myZyXEL.com
account
Existing
myZyXEL.com
account
User Name
Check
Password
Confirm
Password
E-Mail Address
X6004 User's Guide
DESCRIPTION
If you select Existing myZyXEL.com account, only the User Name
and Password fields need to be filled in.
If you haven't created an account at myZyXEL.com, select this option
and configure the following fields to create an account and register your
X6004.
If you already have an account at myZyXEL.com, select this option and
enter your user name and password in the fields below to register your
X6004.
Enter a user name for your myZyXEL.com account. The name should be
between 6 ~ 20 alphanumeric characters. Underscores are allowed but
spaces are not.
Click this button to check with the myZyXEL.com database to verify the
user name you entered has not been used.
Enter a password of between 6 ~ 20 alphanumeric characters.
Underscores are allowed but spaces are not.
Enter the password again for confirmation.
Enter your e-mail address. You can use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without
spaces.
Chapter 36 License Control
479