Configuring The Call Recording Screen - ZyXEL Communications X6004 User Manual

Hide thumbs Also See for X6004:

Table of Contents

22.10.1 Configuring the Call Recording Screen

Use this screen to configure call recording on the X6004. Click Configuration >

PBX > Call Services > Call Recording to open the screen as following.

Figure 210 Call Recording

The following table describes the labels in this screen.

Table 130 Call Recording

X6004 User's Guide

Use this section to specify for which trunks the X6004 should record all

outgoing and incoming calls. Select a trunk in the Peer Pool column and

click the right arrow to select it for recording.

Select a trunk in the Recorded Peer column and click the left arrow to

not record this trunk's calls.

Use this section to specify for which extensions the X6004 should record

all outgoing and incoming calls. Select an extension in the Peer Pool

column and click the right arrow to select it for recording.

Select an extension in the Recorded Peer column and click the left arrow

to not record this extension's calls.

Click this to save your changes and to apply them to the X6004.

Chapter 22 Call Services