The Initrd Screens - ZyXEL Communications X6004 User Manual

39.6.3 The Initrd Screens

Initrd is a shell that contains special commands not available in the regular
command line interface. It allows you to reset the X6004 to the default WAN/LAN
settings, check the file system integrity, and reset the admin password.
To access the initrd screens:
Connect your managing computer directly to the X6004's console port using the
1
terminal settings described in
Reboot or startup the X6004. You cannot access the debugging menu from the
2
regular command line interface; you can only access it during the boot sequence.
During the initialization phase of the boot sequence, wait until the message
3
"Press Enter to run initrd !!!!" appears, then press [ENTER].
Figure 305 The X6004 Boot Sequence
The initrd main menu appears.
4
X6004 User's Guide
Section 39.6.1 on page
Chapter 39 Troubleshooting
516.
517