Before You Begin; Zystack Configuration - ZyXEL Communications X6004 User Manual

however, has not been configured as a local subnet. Calls that originate from
Subnet 2 must go through X6004 A and B in order to reach SIP clients connected
to B.
Figure 215 Internal Call Routing
Subnet 1
192.168.1.0/24
Subnet 2
172.10.10.0/24
172.10.10.1

23.1.3 Before You Begin

Before you start to configure a ZyStack, please do the following:
All the X6004s should use the same interface, either LAN or WAN, to create a
ZyStack. The setting on the master X6004 determines which interface the X6004s
should use.

23.2 ZyStack Configuration

Use this screen to view and manage your ZyStack settings. Click Configuration >
ZyStack > Configuration in the navigation panel to view the screen as shown.
Figure 216 ZyStack > Configuration
X6004 User's Guide
192.168.1.1
A
10.1.1.1
Chapter 23 ZyStack
B
192.168.1.2
192.168.1.102
Subnet 3
10.1.1.0/24
357