Snom Batch Configuration Xml File; Snom Profile Setup: Edit - ZyXEL Communications X6004 User Manual

7.3.2 snom Batch Configuration XML File

Here is an example of the snom batch configuration XML file.
<?xml version="1.0" encoding="utf-8"?>
<settings>
<phone-settings e="2">
<setting_server perm="RW">http://192.168.1.12:8080/provision/snom-lan-
{mac}.htm</setting_server>
<update_policy perm="">auto_update</update_policy>
<pnp_config perm="">on</pnp_config>
<firmware_status perm="">http://192.168.1.12:8080/provision/
snom_300.xml</firmware_status>
<user_active idx="1" perm="">on</user_active>
<user_name idx="1" perm="">2222</user_name>
<user_pname idx="1" perm="">2222</user_pname>
<user_host idx="1" perm="">192.168.1.12</user_host>
<user_hash idx="1" perm="">e5dd5800c7323de00c2f8f06173588c9</user_hash>
<user_expiry idx="1" perm="">3600</user_expiry>
<codec1_name idx="1" perm="">18</codec1_name>
<codec2_name idx="1" perm="">0</codec2_name>
<codec3_name idx="1" perm="">8</codec3_name>
<codec4_name idx="1" perm="">2</codec4_name>
<codec5_name idx="1" perm="">3</codec5_name>
<codec6_name idx="1" perm="">18</codec6_name>
<codec7_name idx="1" perm="">4</codec7_name>
<user_dtmf_info idx="1" perm="">sip_info_only</user_dtmf_info>
<user_dynamic_payload idx="1" perm="">off</user_dynamic_payload>
</phone-settings>
</settings>
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%

7.3.3 snom Profile Setup: Edit

Use this screen to set up the auto provisioning settings for a snom extension on
the X6004. To access this screen, click Configuration > PBX > Server
Configuration > Auto Provision> snom Profile Setup and then click the Edit
button for a specific extension.
Figure 71 snom Profile Setup > Edit
X6004 User's Guide
Chapter 7 Auto Provision
161