Table of Contents
Advertisement
Chapter 19 Auto-Attendant
Table 72 Configuration > PBX > Outbound Line Management > Auto-Attendant
LABEL
Description
Add, Advanced,
Edit, Delete
19.4.1 Add/Edit Auto-Attendant
Use this screen to add or edit an auto-attendant. To access this screen, click the Add or Edit
icon in the Configuration > PBX > Outbound Line Management > Auto-Attendant screen
to view the screen as shown.
Only the Add Auto-Attendant screen is shown. In the Edit Auto-Attendant
screen, the field names change from Add to Edit.
Figure 162 Add/Edit Auto-Attendant
Each field is described in the following table.
Table 73 Add/Edit Auto-Attendant
LABEL
Name
Description
Add/Edit
Cancel
19.4.2 Auto-Attendant Menu Settings
Use this screen to edit auto-attendant menu settings. Click the Advanced icon in the
Configuration > PBX > Outbound Line Management > Auto-Attendant screen to view a
screen as shown next.
180
DESCRIPTION
This field displays the description for an Auto-Attendant.
Click:
•
Add - to create a new Auto-Attendant.
•
Advanced - to configure an Auto-Attendant.
•
Edit - to change the name or description of an Auto-Attendant.
•
Delete - remove an existing Auto-Attendant.
DESCRIPTION
Type a name for this Auto-Attendant. You can use alphanumeric characters as
well as the underscore "_". Spaces are not allowed.
Type a description for this Auto-Attendant. You can use alphanumeric characters
as well as the underscore "_". Spaces are allowed.
Click Add to save your changes.
Click Cancel to go back to the previous screen without saving your changes.
X6004 User's Guide
Advertisement
Table of Contents
