The Edit Ring Group Screen - ZyXEL Communications X6004 User Manual

Chapter 14 Ring Group
Each field is described in the following table.
Table 71 Ring Group > Add
LABEL
Add Ring Group
Machine ID
Group Name
Description
Add
Cancel

14.2.2 The Edit Ring Group Screen

Use this screen to change the description for a ring group. To access this screen,
click Configuration > PBX > Extension Management > Ring Group > Edit.
Figure 118 Ring Group > Edit
Each field is described in the following table.
Table 72 Ring Group > Edit
LABEL
Ring Group Edit
Group Name
Description
Apply
Cancel
234
DESCRIPTION
Select the ID of the X6004 on which you want to configure the ring
group. This is an internal name (not configurable) of the X6004. Only
one choice is shown if you have not configured ZyStack.
Type the name of this ring group. You can use alpha-numeric
characters and spaces are not allowed.
Type the description for this ring group. You can use alpha-numeric
characters and spaces are allowed.
Click this to save your changes.
Click this to go back to the previous screen without saving your
changes.
DESCRIPTION
This field displays the name of this ring group.
Type the description for this ring group. You can use alpha-numeric
characters and spaces are allowed.
Click this to save your changes.
Click this to go back to the previous screen without saving your
changes.
X6004 User's Guide