The Edit Ring Group Screen - ZyXEL Communications X6004 User Manual

Chapter 14 Ring Group
Each field is described in the following table.
Table 61 Configuration > PBX > Extension Management > Ring Group > Add
LABEL
Add Ring Group
Machine ID
Group Name
Description
Add
Cancel

14.2.2 The Edit Ring Group Screen

Use this screen to change the description for a ring group. To access this screen, click
Configuration
Figure 173 Configuration > PBX > Extension Management > Ring Group > Edit
Each field is described in the following table.
Table 62 Configuration > PBX > Extension Management > Ring Group > Edit
LABEL
Ring Group Edit
Group Name
Description
Apply
Cancel
14.2.3 The Configure Ring Group Screen
Use this screen to create paging groups, hunt groups or both. To access this screen, click
Configuration > PBX > Extension Management > Ring Group > Advanced.
190
DESCRIPTION
Select the ID of the X6004 on which you want to configure the ring group. This is
an internal name (not configurable) of the X6004. Only one choice is shown if you
have not configured ZyStack.
Type the name of this ring group. You can use alpha-numeric characters and
spaces are not allowed.
Type the description for this ring group. You can use alpha-numeric characters
and spaces are allowed.
Click this to save your changes.
Click this to go back to the previous screen without saving your changes.
> >
PBX Extension Management
DESCRIPTION
This field displays the name of this ring group.
Type the description for this ring group. You can use alpha-numeric characters
and spaces are allowed.
Click this to save your changes.
Click this to go back to the previous screen without saving your changes.
> > .
Ring Group Edit
X6004 User's Guide