How Auto Provisioning Works; Auto Provision Screen; Figure 89 Configuration > Pbx > Server Configuration > Auto Provision - ZyXEL Communications IP PBX X6004 User Manual

Ip pbx
Table of Contents

Advertisement

Chapter 8 Auto Provision
for auto provisioning with the X6004. See the documentation that came with your
ZyXEL device for information on how to do this.

8.1.2 How Auto Provisioning Works

When a ZyXEL device is configured for auto provisioning, it attempts to find an auto
provisioning server on its network. ZyXEL devices use Simple Service Discovery Protocol
(SSDP) to find the IP address of an auto provisioning server (for example the X6004). This
process is referred to as auto discovery. Some ZyXEL devices allow you to enter the IP
address of the auto provisioning server.
The auto discovery process is limited to your LAN.
Once a ZyXEL VoIP devices finds the X6004, it sends an HTTP request for a configuration
file. The X6004 checks to see if it has a configuration file associated with the serial number or
MAC address of the ZyXEL device requesting the configuration file. If the X6004 has the
configuration file, then it sends the configuration file to the ZyXEL VoIP device.

8.2 Auto Provision Screen

If an auto provision file has been configured for a SIP extension, this screen displays the
mapping between a SIP extension and a ZyXEL VoIP device's MAC address or serial number.
To access this screen, click Configuration > PBX > Server Configuration > Auto
Provision.
Figure 89 Configuration > PBX > Server Configuration > Auto Provision
104
X6004 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

X6004

Table of Contents