Table of Contents
Advertisement
Chapter 6 Network Deployment
6.3 The WAN Screen
You can configure your connection to the ISP or the default gateway router as well as DNS
server information. This allows the X2002 to communicate with IP devices on the WAN.
This screen allows you to set up a connection with the ISP or the default gateway router. To
display, click Configuration > Network > WAN.
Figure 97 Configuration > Network > WAN
The following table describes the labels in this screen.
Table 14 Configuration > Network > WAN
LABEL
Get automatically
from ISP
Static IP (Default)
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Apply
Reset
106
DESCRIPTION
Select this if your ISP did not assign you a static IP address. Click Renew to send
a request to the DHCP server for a new IP address.
Select this if your ISP or network administrator assigned you a static IP address.
Enter the IP address provided by your ISP or network administrator.
Enter the subnet mask your ISP or network administrator provided for the remote
node.
Enter the IP address your ISP or network administrator provided for the default
gateway to the Internet.
Enter the IP address of the DNS server your ISP or network administrator
provided to you.
Enter the IP address of the second DNS server your ISP or network administrator
provided to you. If you were not provided one, leave this field blank.
Click to save your changes.
Click to restore your previously saved settings.
X2002 User's Guide
Advertisement
Table of Contents
