Defining The Ipsec Vpn Remote Configuration - Motorola WS5100 Series Reference Manual

6-52 WS5100 Series Switch System Reference Guide
ESP Encryption
Scheme
ESP Authentication
Scheme
Mode
5. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel

6.8.2 Defining the IPSec VPN Remote Configuration

Use the IPSec VPN Remote
remote end of the IPSec VPN tunnel. The Remote tab is also used for defining the IP address range used
within the IPSec VPN tunnel and configuring the authentication scheme for user permissions within the IPSec
VPN tunnel.
To define the IPSEc VPN's remote configuration:
1. Select Security
Select the Use ESP checkbox to define the ESP Encryption Scheme. Options
include:
• None - No ESP encryption is used with the transform set.
• ESP-DES - ESP with the 56-bit DES encryption algorithm.
• ESP-3DES - ESP with 3DES, ESP with AES.
• ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
• ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
• ESP-AES 256 - ESP with 3DES, ESP with AES (256 bit key).
Select the Use ESP checkbox to define the ESP Authentication Scheme. Options
include:
• None - No ESP authentication is used with the transform set.
• MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Define the current mode used with the transform set. The mode is either Tunnel or
Transport.
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
tab to configure the DNS and/or WINS Servers used to route packets to the
> IPSec VPN from the main menu tree.