Motorola WS5100 Series Reference Manual page 349

This value is read-only within the Groups tab. Click
group or click Add to create a new group with unique access assignments.
6. To modify the attributes of an existing group, select the group from the list of groups displayed and click
the Edit button.
Modify the existing group's guest designation, VLAN ID, access period and WLAN assignment.
7. If an existing group is no longer needed (perhaps obsolete in function), select the group and click the
Delete button to permanently remove the group from the list. The group can only be removed if all the
users in the group are removed first.
8. To create a new group, click the
Name Define a unique group name that differentiates this new group from others with
similar attributes.
Guest Group Select the
within) only temporary access to the local Radius server, thus restricting their
authentication period to a user defined access interval.
VLAN ID Define the VLAN ID for the new group. The VLAN ID is representative of the shared
SSID each group member (user) employs to interoperate within the switch
managed network (once authenticated by the local Radius server).
Time of Access Start Set the time the group is authenticated to interoperate. Each user within the group
is authenticated with the local Radius server. Those group members successfully
authenticated are allowed access to the switch using the restrictions defined for
the group.
Time of Access End Set the time each group's user base will loose access privileges within the switch
managed network. After this time, users within this group will not be
authenticated by the local Radius server. However, if a user is part of a different
group that has not exceeded their access end interval, the user may still
interoperate with the switch (remain authenticated) as part of that group.
Available WLANs Use the Available WLANs
this new group from the available list to the configured list. Once on the
configured list (and the changes applied), the members of this group can
interoperate with the switch on these WLANs (once authenticated by the local
Radius server).
Configured WLANs The Configured WLANs columns displays the WLANs this new group can operate
within (once users are configured). Use the
move WLANs from the available list to the configured list.
Time of access in Select the checkboxes corresponding to the days of the week you would like this
days new group to have access to the switch managed network. Of course, the user
base within the group still needs to be authenticated by the local Radius server
first.
9. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel to close the dialog without committing updates to the running configuration.
Edit
Add button and provide the following information.
Guest Group checkbox to assign this particular group (and the users
Add -> and Remove <-
to modify the access assignments of an existing
functions to move WLANs for
Add -> and Remove <- functions to
6-79
Switch Security