Motorola WS5100 Series Reference Manual page 412

8-18 WS5100 Series Switch System Reference Guide
5. Use the To drop-down menu (within the Target field) to define whether the target panic file is to be sent
to the system's local disk (Local Disk) or to an external server (Server).
6. Provide the name of the file to be transferred to the location specified within the
7. If Server has been selected as the source, use the
file transfer will be sent using FTP or TFTP.
8. If Server has been selected as the source, enter the
receiving the target panic file.
9. If Server has been selected as the source, enter the
target location. The User ID is required for FTP transfers only.
10.If Server has been selected as the source, enter the
file to the target location.
11.Specify the appropriate path name to the target directory on the local system disk or server as configured
using the "To" parameter. If local server is selected, use the Browse button to specify a location on your
local machine.
12. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
13.Click the Transfer
process as necessary to move each desired log file to the specified location.
14.If a problem condition is discovered during the file transfer, click the
transfer.
15. Click the Close
Status field for the current state of the requests made from applet. This field displays error
button when ready to move the target file to the specified location. Repeat the
button to exit the dialogue and abandon the transfer.
Using drop down-menu to configure whether the panic
IP Address of the destination server or system
User ID credentials required to send the file to the
Password required (for FTP transfers) to send the
Abort
File field.
button to terminate the