Motorola WS5100 Series Reference Manual page 388

7-22 WS5100 Series Switch System Reference Guide
5. Select the user role from the options provided in the
following options:
Monitor
Help Desk Manager
Network
Administrator
System Administrator Select
Web User
Administrator
Super User
NOTE: By default, the switch is HTTPS enabled with a self signed certificate. This is
required since the applet uses HTTPS for user authentication.
NOTE: There are some basic operations/CLI commands like exit, logout and help available
to all user roles. All roles except Monitor can perform Help Desk role operations.
6. Select the access modes you want to assign to the user from the options provided in the
panel. Select one or more of the following options:
Console
SSH
Telnet
Applet
7. Refer to the
The Status is the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch.
8. Click on OK
9. Click Cancel
If necessary, modify user permissions without any administrative rights. The
Monitor option provides read-only permissions.
Optionally assign this role to someone who typically troubleshoots and debugs
problems reported by the customer. the Help Desk Manager typically runs
troubleshooting utilities (like a sniffer), executes service commands, views/
retrieves logs and reboots the switch.
The Network Administrator
parameters like IP config, VLANs, L2/L3 security, WLANs, radios, IDS and hotspot.
System Administrator
settings like NTP, boot parameters, licenses, perform image upgrade, auto install,
manager redundancy/clustering and control access.
Assign Web User Administrator
authentication (hotspot).
Select Super User (if necessary) to assign complete administrative rights.
Provides the new user access to the switch using the console (applet)
Provides the new user access to the switch using SSH.
Provides the new user access to the switch using Telnet
Provides the new user access to the switch using the Web UI (applet)
Status field for an indication of any problems that may have arisen.
to complete the modification of the users privileges.
to revert back to the last saved configuration without saving any of your changes.
Associated Roles field. Select one or more of the
provides configures all wired and wireless
(if necessary) to allow the user to configure general
privileges (if necessary) to add users for Web
Access Modes