Motorola WS5100 Series Reference Manual page 262

5-54 WS5100 Series Switch System Reference Guide
3. Select an existing neighbor and click the
The radio index and description display in the upper right corner of the screen. The
value represents the radios that can be added as a neighbor for the target radio.
existing radios (neighbors).
4. Select one of the following four actions from the Self Healing Action drop-down menu:
• None - The radio takes no action at all when its neighbor radio fails.
• Open Rates - The radio will default to factory-default rates when its neighbor radio fails.
• Raise Power - The radio raises its transmit power to the maximum provided its power is lower than
the maximum permissible value.
• Both - The radio will open its rates as well as raise its power.
5. Click the Add ->
dedicates neighbors for this radio.
6. Select a radio and click
Radios list.
7. Refer to the
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
8. Click OK to save the changes to the running configuration and close the dialog.
9. Click Cancel
button to move a radio from the Available Radios list to the Neighbor Radios list. This
<- Remove to move the radio from the Neighbor Radios list to the Available
Status field for an update of the edit process.
to close the dialog without committing updates to the running configuration.
Edit button.
Available Radios
Neighbor Radios are