Motorola WS5100 Series Reference Manual page 95

The following configuration details display in the table:
Name Displays the name of the virtual interface.
VLAN ID Displays the VLAN ID associated with the interface.
DHCP Displays whether the DHCP client is enabled or not. A green check mark defines
the DHCP client as enabled for the interface. A red X means the interface is
disabled.
Primary IP Address Displays the IP address for the virtual interface.
Primary Subnet Mask Displays the subnet mask assigned for this interface.
Admin Status Displays whether the virtual interface is operational and available to the switch.
Oper Status Displays whether the selected Switch Virtual Interface is currently (Up) or not
(Down) on the switch.
Management A green checkmark within this column defines this VLAN as currently used by the
Interface switch. This designates the interface settings used for global switch settings in
case of conflicts. For example, if multiple SVIs are configured with DHCP enabled
on each, the switch could have multiple domain names assigned from different
DHCP servers.The one assigned over the selected Management Interface would
be the only one used by the switch. This setting does not affect any of the
Management Access Interfaces configured using
Configuring Access Control on page
3. Select a record from the table and click the
Modifying a Virtual Interface on page
7-2.
Edit button to modify the record. For more information, see
4-15.
4-13
Network Setup