Nac Configuration Examples Using The Switch Cli - Motorola WS5100 Series Reference Manual

3. Select a item from the Exclude List's
WLANs field).
4. Map the selected list item with as many WLANs as needed (be selecting the WLAN's checkbox). Use the
Select All button to associate each WLAN with the selected list item.
5. To remove the WLAN Mappings, select the
6. Refer to the Status
are any "SET/GET" operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
7. Click OK to save and add the new configuration and close the dialog window.
8. Click Cancel

4.5.6 NAC Configuration Examples Using the Switch CLI

The following are NAC include list, exclude list and WLAN configuration examples using the switch
CLI interface:
4.5.6.1 Creating an Include List
Since few devices require NAC, Motorola recommends using the "bypass-nac-except-include-list" option.
Refer to the commands below to create a NAC Include List:
1. Create a NAC include list.
WS5100 (config-wireless) #client include-list Desktop
WS5100 (config-wireless-client-list) #
NOTE: The instance changes from
client-list)
List Name
field for a display of the current state of the requests made from the applet. Requests
to close the dialog without committing updates to the running configuration.
.
field and click the Edit
Deselect All button to clear the mappings.
(config-wireless)
Network Setup
button (within the Configured
to
(config-wireless-
4-71