Motorola WS5100 Series Reference Manual page 380

7-14 WS5100 Series Switch System Reference Guide
Threshold values for:
Switch
Unit of Threshold
Values
4. Select a threshold and click the
AP and WLAN can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for the MU,
AP or WLAN. Ensure the value set is realistic, in respect to the number of MUs and APs supporting
WLANs within the switch managed network.
5. Use the Maximum Number of Packets to Send a Trap
value used as the minimum number of data packets required for a trap to be generated for a target event.
Ensure the value is realistic, as setting it to low could generate traps unnecessarily. Refer to
Trap Threshold Values on page 7-15
6. Click the Apply
7. Click the Revert
contents of the screen were last applied are discarded.
Use the Threshold Name
an appropriate Threshold Value unique to the switch. For information on specific
values, see Wireless Trap Threshold Values on page
Displays the measurement value used to define whether a threshold value has been
exceeded. Typical values include Mbps, retries and %. For information on specific
values, see Wireless Trap Threshold Values on page
Edit button to display a screen wherein threshold settings for the MU,
for additional information.
button to save changes made to the screen since the last saved configuration.
button to revert the screen back to its last saved configuration. Changes made since the
and Threshold Conditions as input criteria to define
7-15.
7-15.
field (at the bottom of the screen) to enter a
Wireless