10/100/1000 Port Status Led Codes - Motorola WS5100 Series Reference Manual

1.1.2.1 Start Up
Power off
Power On Self Test (POST) running
POST succeeded
1.1.2.2 Primary
Active (Continually Adopting Access Ports)
No License to Adopt
1.1.2.3 Standby
Active (Failed Over and Adopting Ports)
Active (Not Failed Over)
1.1.2.4 Error Codes
POST failed (critical error)
Software initialization failed
Country code not configured.
Note: During first time setup, the LEDs will remain
in this state until the country code is configured.
No access ports have been adopted

1.1.3 10/100/1000 Port Status LED Codes

A WS5100 has two LED indicators for its RJ-45 ports:
• Upper left (amber/green) for link rate
• Upper right (green) for link activity
The following table provides additional information about the status of the 10/100/1000 Port Status LEDs.
Event
Event
Event
Event
Top LED
Off
All colors in rotation
Blue solid
Top LED
Blue blinking
Amber blinking
Top LED
Blue blinking
Blue blinking
Top LED
Red blinking
Amber solid
Amber solid
Blue blinking
1-3
Overview
Bottom LED
Off
All colors in rotation
Blue solid
Bottom LED
Blue solid
Amber blinking
Bottom LED
Blue blinking
Amber solid
Bottom LED
Red blinking
Off
Amber blinking
Amber blinking