Viewing Discovered Switches - Motorola WS5100 Series Reference Manual

5-58 WS5100 Series Switch System Reference Guide
End IP Address
SNMP Version
4. Refer to the
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
5. Click OK to save the changes to the running configuration and close the dialog.
6. Click Cancel

5.7.2 Viewing Discovered Switches

Refer to the Recently Found Devices
discovered device compatible with the locating switch (running switch software version 1.1 or higher) is
displayed in a shaded color to distinguish it from non-compatible devices. The switch Web UI enables users
display the Web UI of the discovered device in a separate browser window.
To view the devices located by the switch:
1. Select Services
2. Select the Recently Found Devices
Enter the ending numeric (non DNS) IP address from where the search for
available network devices is conducted
Use the drop-down menu to define the SNMP version (either v2 or v3) used for
discovering available network devices.
Status field for an update of the edit process.
to close the dialog without committing updates to the running configuration.
tab to view a table of devices found by the discovery process. Each
> Discovery from the main menu tree.
tab.