Motorola WS5100 Series Reference Manual page 73

2. Use the Browse
3. Use the To drop-down menu (within the Target field) and select Server. This defines the transfer location
of the configuration file. Enter the file location marked to store the transferred file.
4. Use the Using
HTTP or SFTP. This field display the default port for FTP,TFTP, HTTP or SFTP. The value in this field can be
configured as required. Enter the IP Address of the server receiving the source configuration. Ensure the
IP address is valid or risk jeopardizing the success of the file transfer. Enter the User ID credentials
required to transfer the configuration file from a FTP server.
5. Enter the Password
6. Specify the appropriate
depending on the target selected.
7. Click the Transfer
displays the file transfer message.
8. Click Abort at any time during the transfer process to abort the file transfer.
3.5.1.3 Transferring a file from a Server to a Wireless Switch
To transfer a file from a Server to the switch:
button and select a file for transfer.
drop down-menu to configure whether the log file transfer is conducted using FTP, TFTP,
required to send the configuration file from an FTP server.
Path name to the target directory on the server. The target options are different
button to complete the file transfer. The
Switch Information
Message section in the main menu area
3-27