Configuring Wmm - Motorola WS5100 Series Reference Manual

4-60 WS5100 Series Switch System Reference Guide
6. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
7. Click Refresh
8. Click Close

4.5.3 Configuring WMM

Use the WMM
enabled/disabled designation, and Access Category. WMM is for downstream and WLAN WMM is for
upstream data traffic.
To view existing WMM Settings:
1. Select Network
2. Click the WMM
The WMM
Idx
SSID
Description
WLAN enabled
WMM enabled
Status field for the current state of the requests made from applet. This field displays error
to update the Packet Rate and Retry Count data displayed within the screen.
to close the dialog and re turn to the Network > Wireless LANs > Statistics screen.
tab to review a WLAN's current index (numerical identifier), SSID, description, current
> Wireless LANs from the main menu tree.
tab.
tab displays the following information:
Displays the WLANs numerical identifier. The WLAN index range is from 1 to 32.
Click the Edit button to modify this property.
Displays the Service Set ID (SSID) associated with each WLAN.
Displays a brief description of the WLAN.
Displays the status of the WLAN. A Green check defines the WLAN as enabled
and a Red "X" means it is disabled. The enable/disable setting can be defined
using the WLAN Configuration screen.
Displays WLAN-WMM status. It can be enabled (for a WLAN) from the WLAN
Configurations Edit screen by selecting the Enable WMM checkbox.