Motorola WS5100 Series Reference Manual page 265

If SNMP v3 is used with a discovering profile, a
Password are required to match the name used by the remote network management software of the
discovered switch.
When the credentials of the V2 Read Community or V3 Authentication screens are satisfied, the switch
discovery process begins.
7. If necessary, click the
discovery operation.
5.7.1.1 Adding a New Discovery Profile
If the contents of an existing profile are no longer relevant to warrant modification using the Edit function,
then a new switch discovery profile should be created
To create a new switch discovery profile:
1. Select Services
2. Click the Add
3. Define the following parameters for the new switch discovery profile:
Profile Name
Start IP Address
Stop Discovery button (enabled only during the discovery operation) to stop the
> Discovery from the main menu tree.
button at the bottom of the screen.
Define a user-assigned name used to title the profile. The profile name should
associate the profile with the group of devices or area where the discovered
devices should be located.
Enter the starting numeric (non DNS) IP address from where the search for
available network devices is conducted.
V3 Authentication screen displays. The User Name and
5-57
Switch Services