Motorola WS5100 Series Reference Manual page 436

B - 14 WS5100 Series Switch System Reference Guide
3. Ensure the
When disabled, there is no automatic adoption of non-configured radios on the network. Additionally,
default radio settings will NOT be applied to access ports when automatically adopted.
Any WLAN configured on the switch becomes an extended WLAN by default for an AAP.
4. Select
5. Select the target WLAN you would like to use for AAP support from those displayed and click the
button.
6. Select the
Selecting the checkbox designates the WLAN as independent and prevents traffic from being
forwarded to the switch. Independent WLANs behave like WLANs as used on a a standalone access
point. Leave this option unselected (as is by default) to keep this WLAN an extended WLAN (a typical
centralized WLAN created on the switch).
Adopt unconfigured radios automatically
NOTE For IPSec deployments, refer to
for IPSec and Independent WLAN"
red and associated comments in green.
Network > Wireless LANs
Independent Mode (AAP Only)
option is NOT selected.
"B.4.4. Sample Switch Configuration File
and take note of the CLI commands in
from the switch main menu tree.
checkbox.
Edit