Motorola WS5100 Series Reference Manual page 104

4-22 WS5100 Series Switch System Reference Guide
Authentication
Encryption
Independent Mode
QOS Weight
3. Click the Edit
settings can be viewed or changed.
4. Click the Enable
When disabled, a red "X" displays. Enabled WLANs are display in a number of different switch Web UI
configurations for additional configuration activities. To enable or disable a WLAN, select it from the
table and click the Enable or Disable button. The Enable button is only available when the selected WLAN
is disabled.
5. Click the Disable
When disabled, a red "X" displays. To enable or disable a WLAN, select it from the table and click the
Enable or Disable button. The Disable button is only available when the selected WLAN is enabled.
Displays the type of authentication used with the specified WLAN. Click the
button to modify the WLAN's current authentication scheme. For information on
configuring an authentication scheme for a WLAN, see
Authentication Types on page
Displays the type of wireless encryption used on the specified WLAN. When no
encryption is used, the field displays "none". Click the
WLAN's current encryption scheme. For information on configuring an
authentication scheme for a WLAN, see
page 4-47.
Determines whether the WLAN is functioning as an independent or extended
WLAN in regards its support of adaptive AP (AAP) operation.
Independent WLANs (defined by a
configured from the switch. Specify a WLAN as independent for no traffic to be
forward to the switch. Independent WLANs behave like WLANs as used on a a
standalone access point.
Extended WLAN (defined by the default
created on the switch.
Select an existing WLAN to revise its default extended mode designation if
intending to use the WLAN for AAP support. For more information, see
WLAN Configuration on page
Defines the Quality of Service weight for the WLAN. WLAN QoS will be applied
based on the QoS weight value with higher values assigned priority. The range for
QoS. weight values is between 1 and 10 with 1 being the default value.
button to display a screen where WLAN information, encryption and authentication
button to enable the selected WLAN. When enabled, a green check mark displays.
button to disable the selected WLAN. When enabled, a green check mark displays.
Configuring
4-30.
Edit
Configuring Different Encryption Types on
green checkmark) are local to an AAP and
red X) are typical centralized WLANs
4-24.
Edit
button to modify the
Editing the