Crypto Ipsec Config Commands - Motorola RFS7000 Series Reference Manual

Use the
(config-crypto ipsec)
3des, esp-sha-hmac, etc.). The transform-set is then assigned to a crypto map using the map's set transform-
set command. For more details see crypto-map transform-set on

9.1 Crypto IPsec Config Commands

Table summarizes the
config-crypto-ipsec
Command
clrscr Clears the display screen.
end Ends the current mode and moves to the EXEC mode.
exit Ends the current mode and moves to the previous mode.
help Displays the interactive help system.
mode Configures IPSec Transporation Mode.
no Negates a command or set its defaults.
service Displays service commands.
show Show running system information.
Crypto - ipsec Instance
instance to define the transform configuration for securing data(e.g., esp-
commands within the RFS7000 Switch command line interface.
Table 9.1 Crypto IPSec Command Summary
Description
page 10-9.
Ref.
page 6-2
page 6-3
page 6-4
page 6-5
page 9-2
page 6-6
page 6-7
page 9-3