Motorola WS5100 Series Reference Manual page 172

4-90 WS5100 Series Switch System Reference Guide
Supported rates allow an 802.11 network to specify the data rate it supports. When a MU attempts to
join the network, it checks the data rate used on the network. If a rate is selected as a basic rate, it is
automatically selected as a supported rate. The basic default rates for an 802.11a radio differ from those
802.11b default rates, as an 802.11a radio can support a maximum data rate of 54Mbps, while an
802.11b radio can support a maximum data rate of 11Mbps.
4. Click the Clear all rates
5. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel
4.7.1.3 Adding APs
The Add Radio
Configuration screen. Use the Add screen to add the new radio's MAC address and define its radio type.
To add a Radio to the switch:
1. Select Network
2. Click the Configuration
button to uncheck all of the Basic and Supported rates.
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
screen provides a facility for creating a new (unique) radio index for inclusion within the
> Access Port Radios
tab.
from the main menu.