Motorola WS5100 Series Reference Manual page 184

4-102 WS5100 Series Switch System Reference Guide
2. Click the Configuration
3. Refer to the following information as displayed within the
Type
Placement
Channel
Power dBm
Power mW
4. To modify a radio's adoption defaults, select a radio and click the
Editing Default Access Port Adoption Settings on page
CAUTION: An access port is required to have a DHCP provided IP address before
attempting layer 3 adoption, otherwise it will not work. Additionally, the access port must
be able to find the IP addresses of the switches on the network.
To locate switch IP addresses on the network:
• Configure DHCP option 189 to specify each switch IP address.
• Configure a DNS Server to resolve an existing name into the IP of the switch. The access
tab.
Displays whether the radio is an 802.11a radio or an 802.11 bg model radio
Displays the default placement when an radio auto-adopts and takes on the
default settings. Options include Indoor or Outdoor. Default is Indoor.
Displays the default channel when an radio auto-adopts and takes on the default
settings. This value can be a specific channel, Random, or ACS. Random assigns
each radio a random channel. ACS (Automatic Channel Selection) allows the
switch to systematically assign the channel. Default is random.
Displays the default power when an radio auto-adopts and takes on the default
settings. Defaults are 20 dBM for 802.11bg) and 17 dBm for 802.11a.
Displays the default transmit power in mW (derived from the Power dBm setting).
Defaults are 100 mW for 802.11bg and 50 mW for 802.11a.
port has to get DNS server information as part of its DHCP information. The default DNS
name requested by an AP300 is "Symbol-CAPWAP-Address". However, since the default
name is configurable, it can be set as a factory default to whatever value is needed.
Configuration tab:
Edit button. For more information, see
4-103.