Motorola WS5100 Series Reference Manual page 103

updates to a WLAN's description and their current authentication and encryption schemes. Be careful to
properly map BSS WLANs and security schemes. the WS5100 supports 32 WLANs.
To configure a WLAN:
1. Select Network > Wireless LANs
2. Click the Configuration
The Configuration tab displays the following details:
Index Displays the WLAN's numerical identifier. The WLAN index range is from 1 to 32.
An index can be helpful to differentiate a WLAN from other WLANs with similar
configurations.
Enabled Refer to the Enabled parameter to discern whether the specified WLAN is enabled
or disabled. When enabled, a green check mark displays. When disabled, a red "X"
displays. To enable or disable a WLAN, select it from the table and click the Enable
or Disable button.
ESSID Displays the Service Set ID associated with each WLAN. Click the Edit button to
modify the value to a new unique SSID.
Description Displays a short description of the associated WLAN. Click the Edit button to
modify the value the WLAN description.
VLAN(s) Displays the name of the VLAN the WLAN is associated with. The VLAN ID is an
integer assigned for the corresponding user defined name. The VLAN ID can be
between 1 and 4094. The default VLAN ID is 1.
from the main menu tree.
tab.
4-21
Network Setup