Motorola WS5100 Series Reference Manual page 75

To enable and configure the automatic update feature for switch firmware, configuration files and cluster
configurations:
1. Select Switch > Automatic Updates
2. Refer to the Switch Configuration
configuration file updates. If enabled, the located (updated) configuration file will be used with the
switch the next time the switch boots.
Enable Select the
a newer (updated) file is detected (upon the boot of the switch) at the specified IP
address.
IP Address Define the
version is detected when the switch is booted, it is uploaded to the switch and
used upon the next boot of the switch.
User ID Enter the
File Name (With Provide the complete and accurate path to the location of the configuration files
Path) on the server. This path must be accurate to ensure the most recent file is
retrieved.
Protocol Use the
resident switch
the default setting.
Password Enter the password required to access the server.
from the main menu tree.
field to enable and define the configuration for automatic
Enable checkbox to allow an automatic configuration file update when
IP address of the server where the configuration files reside. If a new
User ID required to access the FTP or TFTP server.
Protocol drop-down menu to specify the
FLASH medium used for the file update from the server. FLASH is
Switch Information
FTP, TFTP, HTTP, SFTP or
3-29