Motorola WS5100 Series Reference Manual page 251

Rogue APs
Self Healing Radios
5. Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
6. Click Close to close the dialog without committing updates to the running configuration.
5.4.2.2 Adding a Redundancy Group Member
Use the Add screen as the means to add a new member (by adding their IP address) to an existing
redundancy group (cluster).
To add a new member to a redundancy group:
1. Select Services
The Redundancy screen displays with the Configuration tab selected.
2. Select the Member
3. Select the Add
4. Enter the IP Address of a new member.
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
7. Click Cancel
Displays the number of Rogue APs detected by each member. Use this information
to discern whether these radios represent legitimate threats to other members of
the redundancy group.
Displays the number of self healing radios on each detected member. These radios
can be invaluable if other radios within the redundancy group were to experience
problems requiring healing by another radio.
field.
> Redundancy from the main menu tree.
tab.
button.
field.
to close the dialog without committing updates to the running configuration.
5-43
Switch Services