Viewing Sole Adapters - Motorola WS5100 Series Reference Manual

2. Click the Enable
The Enabled column displays a green checkmark next to the SOLE adapter once enabled. A Red X
defines the adapter as disabled.
NOTE: In order to set the listening MAC in each radio you must use the radio command in
the switch's Command Line Interface (CLI). An example of the command syntax is:. #radio
<1-n> tag-type aeroscout listen-addr 01-0c-cc-00-00-00v.
3. Click the Disable
the SOLE adapter once disabled.

5.8.2 Viewing SOLE Adapters

Periodically review the SOLE Adapters tab to assess the adapters available to the switch.
To review available SOLE adapters:
1. Select Services
2. Select the SOLE Adapters
3. Review the following to ascertain the SOLE adapters seen by the switch:
Type
Version
Build Date
button to enable a selected SOLE adapter currently disabled.
button to disable a selected SOLE adapter. The Enable column displays a red X next to
> SOLE from the main menu tree.
tab.
Displays the configuration type for all SOLE adapters. Currently, the only
supported type is Aeroscout.
Displays the version number of the SOLE adapter.
Displays the SOLE adapter build date and time.
5-61
Switch Services