Motorola WS5100 Series Reference Manual page 409

2. Select a target file, and select the
3. Use the From drop-down menu to specify the location from which the log file is sent.
If only the applet is available as a transfer location, use the default switch option.
4. Select a target file for the file transfer from the
The drop-down menu contains the core files listed within the File-Mgmt screen.
5. Use the To drop-down menu (within the Target field) to define whether the target log file is to be sent to
the system's local disk (Local Disk) or to an external server (Server).
6. Provide the name of the file to be transferred to the location specified within the
7. If Server has been selected as the source, use the
file transfer is sent using FTP or TFTP.
8. If Server has been selected as the source, enter the
the target log file.
9. If Server has been selected as the source, enter the
target location. Use the user ID for FTP transfers only.
10.If Server has been selected as the source, enter the
location using FTP.
11.Specify the appropriate
the To parameter. If the local disk option is selected, use the browse button to specify the location on the
local disk.
12.Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
13.Click the Transfer button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired log file to the specified location.
14.If a problem condition is discovered during the file transfer, click the
transfer.
15.Click the Close button to exit the screen after a transfer. There are no changes to save or apply.
Transfer Files
File
Path to the target directory on the local system disk or server as configured using
button.
drop-down menu.
Using drop down-menu to configure whether the log
IP Address of destination server or system receiving
User ID credentials required to send the file to the
Password required to send the file to the target
Abort button to terminate the
8-15
Diagnostics
File field.