Motorola WS5100 Series Reference Manual page 407

9. If Server has been selected as the source, enter the
receiving the log file. Ensure the IP address is valid or risk jeopardizing the success of the log file transfer.
10.If Server has been selected as the source, enter the
the target location.
11.If Server has been selected as the source, use the
to send the log file to the target location.
12.Specify the appropriate
configured using the To
13.Click the Transfer button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired log file to the specified location.
14.If a problem condition is discovered during the file transfer, click the
transfer.
15.Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
16.Click the Close button to exit the screen. No values need to be saved once the transfer has been made.
Password
Path name to the target directory on the local system disk or server as
parameter. If the local disk is selected, a browse button is available.
IP Address of the destination server or system
User ID credentials required to send the log file to
parameter to enter the password required
Abort button to terminate the
8-13
Diagnostics