Editing An Existing Wireless Filter - Motorola WS5100 Series Reference Manual

6-14 WS5100 Series Switch System Reference Guide
Authentication
Encryption
5. If the properties of an existing filter fulfill to your needs but still require modification to better filter
devices, select the
Editing an Existing Wireless Filter on page
6. If an existing filter is now obsolete, select it from those listed and click the
7. Click the Add
page 6-15.
8. Click the Memberships
existing WLANs. For more information see,
9. Click on the

6.4.1 Editing an Existing Wireless Filter

Use the Edit screen to modify the properties of an existing filter. This is recommended if an existing filter
contains adequate device address information, but the allow/deny permissions need to be changed or if only
minor changes are required to the starting and ending MAC addresses. If significant changes are required to
a usable filter, consider creating a new one.
To edit an existing filter:
1. Select Special Features
2. Select one of the existing ACLs from the filters list.
3. Click the Edit
The user can modify an ACL Index (numerical identifier) for the ACL, and edit the starting an ending MAC
address range for the devices allowed or denied access to the switch managed network.
4. The Station-ACL Index
designation. The available index range is 1 - 1000. However, the index is not editable, only its starting/
ending MAC range and allow/deny designation. If a new index is needed, create a new filter.
5. Modify the existing
modify the Ending MAC
Displays the authentication scheme configured for the devices comprising this
WLAN.
Displays the encryption method configured for the devices comprising this WLAN.
Edit button. For more information see,
button to create a new filter. For more information, see
button to display a screen wherein a selected index can be added to one or more
Export button to export the contents of the table to a Comma Separated Values file (CSV).
> Filters from the main menu tree.
button at the bottom of the screen to launch a screen for editing an ACL.
is used as an identifier for a MAC Address range and allow/deny ACL
Starting MAC for the target Index or leave the
Address or Allow/Deny
6-14.
Associating an ACL with WLAN on page 6-16
Starting MAC
designation.
Delete button.
Adding a new Wireless Filter on
value as is and just