Motorola WS5100 Series Reference Manual page 138

4-56 WS5100 Series Switch System Reference Guide
• Information
• Traffic
• RF Status
• Errors
Information in
represents statistics from the last hour.
4. Refer to the
ESSID
VLAN
Num Associated
Stations
Authentication Type
Encryption Type
Adopted Radios
5. Refer to the
Pkts per second
Throughput
Avg Bit Speed
Non-unicast Pkts
6. Refer to the
Avg MU Signal
black represents the statistics from the last 30 seconds and information in
Information field for the following information:
Displays the Service Set ID (SSID) for the selected WLAN.
Displays the name of the VLAN the WLAN is associated with.
Displays the total number of MUs currently associated with the selected WLAN.
Displays the authentication method deployed on the WLAN.
Displays the encryption type deployed on the selected WLAN.
Displays the radios adopted by the selected WLAN.
Traffic field for the following information (both received and transmitted):
Displays the average total packets per second that cross the selected WLAN. The
Rx column displays the average total packets per second received on the selected
WLAN. The Tx column displays the average total packets per second sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Displays the average throughput in Mbps on the selected WLAN. The Rx column
displays the average throughput in Mbps for packets received on the selected
WLAN. The Tx column displays the average throughput for packets sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Displays the average bit speed in Mbps on the selected WLAN. This includes all
packets sent and received. The number in black represents this statistic for the
last 30 seconds and the number in blue represents this statistic for the last hour.
Displays the percentage of the total packets for the selected WLAN that are non-
unicast. Non-unicast packets include broadcast and multicast packets. The
number in black represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
RF Status field for the following information:
Displays the average RF signal strength in dBm for all MUs associated with the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
blue